Single-phase INVERTER power source, suitable for welding in MIG/MAG mode and, by polarity reverse, with flux cored wire with no gas protection. It has a compact design, low weight and offers the possibility to be connected to home mains (2,5kW) and to generators with an adequate power. Thanks to all these characteristics, it’s an ideal machine for maintenance, repair, installation and on site welding. Comes with a 3m MB15 torch, a 3m earth cable, an Argon/CO2 GCE release valve, 5 kg SG2 welding wire Ø200mm Ø0,8mm and a startersset of welding consumables MAIN FEATURES • It has curves optimized for iron and flux cored wire. • A dedicated control is provided for fine tuning the arc length. • It's equipped with PFC (Power Factor Correction) device to reduce and stabilize the power absorption.

Voltage	1x230 50-60 Hz
Power	35% 4,2 kVA - 60% 3,7 kVA - 100% 3,2 kVA
MIN-MAX welding current	18 – 160 A
Welding current	35% 160A - 60% 140A - 100% 120A
Control	Electronic
Ø gevulde draad	Ø mm 0,6/0,8/1,0
Maximum wire spool	Ø 200 mm / 5 kg
Protection factor	IP23
Construction norms	EN 60974 – 1 / EN 60974 - 10
Dimensions	210x370x410h mm
Weight	12 kg