Inverter welding machine, DC, pulse, gas-cooled Robust plastic casing with no corners or edges Polarity selection and display: superb for welding self-shielding flux cored wires 4-roll drive. Equipped for 0.8 mm + 1.0 mm steel wires Spool diameter up to 200 mm 3.5 m mains supply lead with 16 A shock-proof plug Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage Comes with a MB15 3m torch, a 3m earth cable, Ø0,8 mm SG2 welding spool Ø200mm, an Argon/CO2 gas release valve and a set of welding consumables

	Picomig 180 puls TKG
		MIG/MAG	TIG	MMA
Setting range for welding current		5 A - 180 A	5 A - 180 A	5 A - 150 A
Duty cycle at ambient temperature		40 °C	40 °C	40 °C
25 %		180 A	–	–
30 %		–	180 A	–
35 %		–	–	150 A
60 %		120 A	140 A	110 A
100 %		100 A	120 A	100 A
Open circuit voltage		80 V
Mains frequency		50 Hz / 60 Hz
Mains fuses (slow-blow)		1 x 16 A
Mains voltage (tolerances)		1 x 230 V (-40 % - +15 %)
Max. connected load		6.4 kVA	4.4 kVA	5.5 kVA
Recommended generator power		7.5 kVA
cos f		0.99
Efficiency		86 %
Dimensions machine, LxWxH in mm		685 x 280 x 360
Weight, machine		15 kg
Protection classification		IP 23
Standards		IEC 60 974-1; -5; -10 / CE / S-Safety sign / EMC class A