Considering the extensive configuration options, you better contact us
Three-phase plasma cutter to cut metal. The device is characterized by a compact, lightweight design. The device itself is simple to use. The absence of a special start, this device can be safely used alongside computers, medical equipment or other devices sensitive to high frequencies. It comes with a 6 meter torch (P35) and a ground wire. MAIN FEATURES - Synergic control with LCD display - Pilot Arc, to cut painted or coated metals. - No high frequency start - The cutting current is not affected by the distance between the torch and the workpiece or the cutting speed - Security on the torch - Electronic control of the cutting current - Electronically controlled cutting parameters and functions - Compressed air flow control - Thermostatic protection
Voltage |
|
Power | 60% 16,6 kVA - 100% 14,3 kVA |
MIN-MAX current | 20 - 85 A |
Duty Cycle | |
Gaspressure | 5,7 - 5,8 bar |
Gasflow | 250 l/min |
Cutting depth | 50 mm |
Protection | IP23 |
Constructionnorms | EN 60974 1 / EN 60974 - 7 / EN 60974 - 10 |
Dimensions | 220x540x460h mm |
Weight | 25 kg |