Considering the extensive configuration options, you better contact us
Three-phase plasma cutter to cut metal. The device is characterized by a compact, lightweight design. The device itself is simple to use. The absence of a special start, this device can be safely used alongside computers, medical equipment or other devices sensitive to high frequencies. It comes with a 6 meter torch (P35) and a ground wire. MAIN FEATURES - Synergic control with LCD display - Pilot Arc, to cut painted or coated metals. - No high frequency start - The cutting current is not affected by the distance between the torch and the workpiece or the cutting speed - Security on the torch - Electronic control of the cutting current - Electronically controlled cutting parameters and functions - Compressed air flow control - Thermostatic protection
Voltage | 3 x 400V 50-60 Hz |
Power | 35% 9 kVA - 60% 7,2 kVA - 100% 6,5 kVA |
MIN-MAX current | 10 - 70 A |
Duty Cycle | 35% 70 A - 60% 60 A - 100% 50 A |
Gaspressure | Not applicable |
Gasflow | 190 l/min |
Cutting depth | 35 mm |
Protection | IP23 |
Constructionnorms | EN 60974 1 / EN 60974 - 7 / EN 60974 - 10 |
Dimensions | 220x420x460h mm |
Weight | 22 kg |